top of page

Handling Rotors at Eleven Workstations: Mobile Hebelift ZH Instead of Carrying by Hand

Zeilhofer HHT
14 hours ago
10 min read

A rotor of around 40 kg, eleven workstations and so far only two hands: this is what handling used to look like in one production facility. In future, a mobile Hebelift ZH with a specially designed handling fixture will take over. It picks up the rotor from the pallet, moves it through all stations and sets it down there horizontally or vertically.


Zeilhofer Handhabungstechnik from Holzkirchen, Germany, designed the Hebelift for this application. This article shows the starting point, the workflow with the Hebelift and what matters when choosing a mobile lifting aid for several workstations.


Explainer video: handling rotors

Key points at a glance

  • Rotors of around 40 kg used to be moved by hand through eleven workstations.

  • In future, a mobile, battery-powered Hebelift ZH takes over lifting, moving and setting down.

  • The fixture grips on stainless steel adapters screwed onto the side, and the rotor can be swivelled by 360 degrees and locked in 90 degree steps.

  • Adjustable pick-up units allow access to height-restricted workstations.

  • No compressed air connection, no rails: the Hebelift moves freely through the hall on omni wheels.


What is a mobile lifting device?

A Hebelift is a floor-mobile lifting aid. It does not stand fixed at one station but rolls to wherever the component is needed. Lifting is electric, controlled by joystick. A detailed overview is given in the guide What is a Hebelift?.


The Hebelift ZH in this application consists of these assemblies:


  • Floor trolley: Lightweight aluminium design on low-friction omni wheels that can be pushed in all directions, with integrated foot brake.

  • Z lifting unit: specially developed aluminium profile for high lateral forces and torques, with end position damping.

  • Articulated jib: manually rotatable by 330 degrees, with detents to lock the rotation.

  • Energy: integrated 48 volt battery with multi-stage charge level indicator, replaceable in no time without tools.

  • Control: finely adjustable, infinitely variable joystick for up and down, Zeilhofer compact control unit with integrated parameterisation, emergency stop as mushroom push button.

  • Handling fixture: C-shaped base unit with two pick-up units for the rotors.


Why an electric Hebelift without compressed air is often the more flexible choice is explained in the guide Hebelift without compressed air. Basics on drive types can be found under Pneumatic or electric drive.


Why moving rotors by hand is a strain

A rotor of around 40 kg is compact but heavy, round and has no natural grip points. If it has to pass through several workstations, the strain adds up quickly. From an ergonomic point of view, manual handling is therefore critical.


  • Weight and shape: Around 40 kg on a small diameter, without handles, can hardly be carried close to the body.

  • Repetition: With eleven workstations, each rotor is set down and picked up again at least eleven times, which adds up to around 440 kg of moved load per component.

  • Rotating and turning: The rotor has to lie horizontally at some stations and vertically at others. Turning by hand means twisting the torso under load.

  • Tight stations: Height-restricted workstations force bending and working with outstretched arms.

  • Component protection: A rotor that bumps or falls during transfer is quickly damaged.


Which loads are considered critical is explained in the article How many kg may you lift? What the consequences cost is shown in the article Musculoskeletal disorders in production.


Legal framework and current situation

Musculoskeletal disorders remain the biggest driver of sick days. According to the AOK health report for Westphalia-Lippe, in the first half of 2026 they caused 21.1 percent of all days of incapacity to work there, ranking first. The number of cases in this group has risen compared with the same period of the previous year.


In Germany, the Load Handling Ordinance requires employers to assess the risks of lifting and carrying and to reduce them with technical means. In addition, from 20 January 2027 the EU Machinery Regulation (EU) 2023/1230 applies. What this means is summarised in the article EU Machinery Regulation 2027: ergonomics duties. A compact overview is provided by our free whitepaper Hebehilfen 2027 (German).


On top of this comes the shortage of skilled workers: anyone who wants to keep experienced employees has to take physical strain out of the processes. More on this in the article Skilled labour shortage and ergonomics.


The starting point in this application

In one production facility, rotors in two sizes are processed. Until now, employees moved each rotor by hand from the pallet through eleven workstations. A lifting aid was to take over this task.


The specification resulted in the following requirements:


  • One device for all eleven workstations, freely movable without rails.

  • Safe pick-up of the rotors from the pallet.

  • Set-down both horizontally and vertically, depending on the workstation.

  • Access to height-restricted workstations.

  • One fixture for two rotor sizes.

  • Simple, sensitive operation directly at the component.


Rotor

Outer diameter large flange

Outer diameter small flange

Height

Large rotor

432 mm

345 mm

104 mm

Small rotor

390 mm

304 mm

89 mm


For each rotor size there is a separate set of adapter units made of V2A stainless steel. To ensure smooth pick-up from the pallet, the pallets are provided at a raised height. The exact height is defined in the course of the project.


The workflow with the Hebelift in seven steps

The Hebelift is designed for a clear sequence. The operator works the joystick with one hand and guides the component with the other.


  1. Fit adapters: The adapter units are screwed onto the side of the rotor.

  2. Position: The operator moves the fixture to the adapters via joystick.

  3. Clamp: A manually operated clamping unit holds the rotor securely in the fixture.

  4. Move: The Hebelift moves with the rotor to the next workstation.

  5. Swivel: If needed, the operator swivels the rotor directly at the component into the required position.

  6. Set down: The rotor is set down in the set-down position of the workstation.

  7. Release: Clamping unit and fixture are released, and the Hebelift is free.


Rotating, swivelling, clamping: the rotor in any position

After pick-up, the rotor can be swivelled by 360 degrees and locked in 90 degree steps via the clamping unit. This way it lies in the right position at every workstation, horizontally or vertically. The entire handling fixture can additionally be rotated by 330 degrees. Control levers, push buttons and guide bar are at an ergonomic height.


Reaching into tight workstations

The pick-up units can be adjusted by about 30 degrees when empty and lock into place in the end position. This allows the fixture to reach into height-restricted workstations as well. The lifting range is 450 to 1,100 mm measured at the underside of the component. How Zeilhofer designs such fixtures is shown in the article Custom grippers and fixtures.


Operation and energy

Lifting and lowering is infinitely variable via joystick and can be finely adjusted. The Zeilhofer compact control unit can be parameterised for the application. Further operating concepts can be found under Controls. Power is supplied by a 48 volt battery that can be replaced without tools. The charger runs on a normal 230 volt socket, and the noise level is below 70 dB.


Technical data at a glance

Feature

Value

Lifting range (underside of component)

450 to 1,100 mm

Rotation of handling fixture

330 degrees

Component swivel

360 degrees, lockable in 90 degree steps

Adjustment of pick-up units

approx. 30 degrees

Width of floor trolley

approx. 1,000 mm

Energy

48 volt battery, 230 V charger

Own weight

approx. 150 kg

Surfaces

anodised aluminium, V2A stainless steel adapters


Solutions compared: Hebelift, manipulator, crane and robot

For heavy components that have to pass through many workstations, there are several approaches. What matters is whether the lifting aid can travel with the component.


Chain hoist or crane

A chain hoist or crane takes the weight but needs a supporting structure above all stations. The load swings on the hook, and targeted swivelling into a specific position is hardly possible.


Stationary manipulator

An articulated jib manipulator guides rigidly and precisely but stands fixed in one place. For eleven workstations, several devices would be needed. A cable manipulator on a ceiling rail covers more area but requires a rail system above all stations.


Industrial robot and cobot

Robots need safety equipment and programming, and changing workstations increase the effort. Where cobots reach their limits is explained in the guide Manipulator or cobot?


Mobile Hebelift

The Hebelift travels with the component. One device serves all stations, without rails, without compressed air and without converting the hall. The human stays in the process and guides with eye and hand, while the technology carries the weight. This principle is described in the guide Semi-automated handling. An overall comparison is provided in the article Manipulator, lift axis, Hebelift compared.


Safety, inspection and operation

A mobile Hebelift has to be safe when lifting and when moving. The Hebelift ZH in this application offers the following functions:


  • Power failure: A brake system engages automatically.

  • Overload and collision: Sensors in the lifting unit stop lifting or lowering immediately.

  • Jamming and tipping: Additional sensors monitor the system.

  • Load loss: A safety device prevents the jib from shooting up.

  • Emergency stop: Mushroom push button directly on the operating unit.

  • Stability: Foot brake on the base frame, detents against unintentional rotation of the jib.

  • CE conformity: Designed in accordance with the Machinery Directive 2006/42/EC, EN ISO 12100 and DIN EN 14238, with risk assessment, declaration of conformity and operating instructions.

  • Documentation: Documents can be accessed directly at the device via a password-protected QR code.

  • Statutory inspection: The procedure and intervals are explained in the guide UVV inspection for lifting aids.

  • Service: Maintenance, spare parts and technical support are provided by our service team.


Checklist: designing a mobile Hebelift for several workstations

With these ten points, a Hebelift for an application with several stations can be requested properly:


  1. Component: Weight, dimensions and variants, for rotors also the flange diameters.

  2. Grip points: Where can the fixture grip, are adapters on the component possible?

  3. Positions: In which position is the component set down at each workstation, horizontally or vertically?

  4. Workstations: Number, distances and routes between the stations.

  5. Heights: Pick-up and set-down heights, height-restricted stations.

  6. Provision: Pallet, rack or trolley, and at what height.

  7. Floor: Level, free of cracks and joints, passage widths.

  8. Energy: Battery and charging point, whether compressed air is needed or deliberately avoided.

  9. Operation: Joystick, push buttons, operating height.

  10. Inspection and service: Statutory inspection, maintenance, spare parts.


The costs involved are explained in the guide What does a manipulator cost? How quickly a lifting aid pays for itself is shown in Calculating the payback of a lifting aid. As an alternative to buying, you can finance via leasing or hire purchase.


How a project with Zeilhofer works

From the enquiry to the running device, Zeilhofer supports the project from a single source. Since 1999, the company has delivered over 2,500 systems in 18 industries to customers in over 50 countries.


  1. Specification and component data: Survey of component, workstations and workflows.

  2. Concept: Design of Hebelift, handling fixture and adapters.

  3. Design and manufacturing: Engineering and manufacturing in Holzkirchen, Germany, according to ISO 9001.

  4. Pre-acceptance: Test at the plant in Holzkirchen or digitally via video.

  5. Installation and commissioning: By a Zeilhofer service technician on site, in this application in one to two working days.

  6. Service: Statutory inspection, maintenance and spare parts over the entire service life.


Glossary

  • Hebelift: Floor-mobile, usually electrically driven lifting aid. More terms in the handling technology glossary.

  • Omni wheels: Wheels with transverse rollers that allow movement in all directions.

  • Handling fixture: Component-specific gripping unit on the Hebelift.

  • Adapter unit: Shaped part screwed onto the component on which the fixture grips.

  • Clamping unit: Manually operated clamp that fixes the component in the fixture.

  • Articulated jib: Rotatable arm that carries the handling fixture.

  • Z lifting unit: Vertical lifting axis of the Hebelift.

  • End position damping: Gentle braking shortly before the end position.

  • Parameterisation: Setting the control for the application, such as speeds and limits.

  • Load handling attachment: Generic term for grippers and fixtures on the handling device.


Frequently asked questions

How much can the Hebelift ZH carry?

The Hebelift ZH from Zeilhofer is designed for loads of up to 100 kg. In this application, it lifts rotors of around 40 kg. Each system is tailored to component, fixture and workstations.


Does the Hebelift ZH need compressed air or rails?

No. The Hebelift works electrically with a 48 volt battery and moves freely across the hall floor on omni wheels. It is charged via a charger on a 230 volt socket. It needs neither compressed air nor rails or foundations.


How is the rotor gripped safely?

Stainless steel adapter units are screwed onto the side of the rotor. Two pick-up units of the fixture grip these adapters, and a manually operated clamping unit fixes the rotor.


Can the rotor be rotated on the Hebelift?

Yes. The rotor can be swivelled by 360 degrees directly at the component and locked in 90 degree steps with the clamping unit. This allows it to be set down horizontally or vertically. In addition, the handling fixture can be rotated by 330 degrees.


How does the Hebelift reach low or tight workstations?

The pick-up units can be adjusted by about 30 degrees when empty and lock into place in the end position. This allows the fixture to reach into height-restricted workstations. The lifting range is 450 to 1,100 mm measured at the underside of the component.


What kind of floor does a mobile Hebelift need?

The floor should be level and free of cracks and joints. The integrated foot brake holds the Hebelift securely in place during work.


What happens in the event of a power failure or collision?

In the event of a power failure, a brake system engages automatically. Sensors in the lifting unit stop the movement in case of overload or collision, and further sensors protect against jamming and tipping.


Can one Hebelift serve several workstations?

Yes, that is exactly what a mobile Hebelift is for. Instead of equipping each station with its own lifting aid, one device accompanies the component from workstation to workstation. In this application there are eleven stations.


Can the Hebelift be used for other components?

There is one set of adapters for each of the two rotor sizes in the project. Other components need a suitable fixture, which Zeilhofer designs on request.


Your application: moving heavy components through several workstations

Do you still move components by hand from station to station? We design the Hebelift for your component, your workstations and your workflow. Call us on +49 (0)8024 / 46330-60 or send us your enquiry.



Further applications of mobile lifting aids: Electric lifting aid without compressed air, Mobile lifting aid for panels, Hebelift in continuous operation and the guide Motor and gearbox assembly. You can find the right lifting aid for your component in the product finder or under Applications.

bottom of page